Ergebnis 1 bis 6 von 6

Thema: EVOTRIPLEX on Spark7162 (TRIPLEX) YAFFS2

  1. #1
    El del VietNam Avatar von elgeneral
    Registriert seit
    Jun 2011
    Beiträge
    3.593
    Post Thanks / Like
    Blog Entries
    45

    EVOTRIPLEX on Spark7162 (TRIPLEX) YAFFS2

    changelog:

    GM TRIPLEX(7162) AND AMIKO2ALIEN+CO
    ################################################## ###########
    Evolux Version=4.01.1
    - cvbs/scart sound fixed
    ################################################## ###########
    EvoluxTriple V4.01.0
    - switch to yaffs2 filesystem please read carefull howto flash image!
    - switched to stm24-210 (thx dboxoldie)
    - amixer fixed
    - nhd2 multituner fix? please test!
    - nhd2 extras-menue add
    - nhd2 time on boot fix

    Code:
    @your own risk!
     no warranty if you damage your box!!
     READ CAREFULL!!!
    
     YOU MUST HAVE ORIG-SPARK VERSION >=1.2.09 IN BOX!!
    
     ###############################################################
     ### FLASH EVOLUX ##############################################
     ###############################################################
     FLASH EVOLUX:
     - format usb-stick with fat/fat32
     - copy "uImage" + "e2yaffs2.img + flash_E2_yaffs2_triplex.sh" into usb-stick-folder "enigma2"
     - connect usb-stick to box-usb-port backside
     - BOOT ORIG-SPARK
    
     ###############################################################
     telnet pingulux-ip
     user: root
     pw: root
    
     check if stick correct mounted:
     ls /storage/c/enigma2
    
     (if you see uImage, e2yaffs2.img all fine)
    
     now we start flashing by:
     /storage/c/enigma2/flash_E2_yaffs2_triplex.sh
    
    
     are you sure? start flashing EVOLUX now (Y/n) ?
    
     select:
     y
    
     ###############################################################
     that takes around 1-2 minutes
     till finished you must turn of AC,
     turn on AC + hold "OK" on box till "FORC" in display,
     press "arrow-down" ("ENG" will displayed),
     press "ok" again and uboot will switch to boot Evolux!
    
     if you want back to orig do same aboth but than "arrow-up" against "arrow-down" and orig will bootup again!
    E2PLI: ________________ nhd2:


    imho is e2pli and nhd2!

    - E2Pli: please after firstboot vali-hd-nano skin change because it works best!
    (mini-pic on hdtv is chopped shown in the skin which is not be harmful to the function! on SDTV is mini-pic ok!)
    oupdate not available!

    other info:
    Tunera = dvb-t
    tunerB = sat1
    tunerC = sat2

    Tunera can switch in / etc / init.d / rcS between DVB-T and DVB-C:

    PHP-Code:
     insmod MODDIR/spark7162.ko Union tuner type # t = terrestical, c = cable 

    change and must be rebooted for tunerconfig again made​​! (default budget dvb-t)

    thanks to pinky1981
    Angehängte Dateien Angehängte Dateien
    ONLY SUPPORT VU+ ORIGINAL
    Vu+Solo2 White Edition
    Qviart Unic
    Qviart Undro
    Mvision HD 700L
    Vu+ Duo2
    Vu+ Ultimo
    PrismCube
    Matrix Cam Air, Vu+ALLCAM, Argolis Triplex
    CCcam 2.1.3 BlackHole Astra-HotBird

    Hidden Content
    Hidden Content


  2. #2
    El del VietNam Avatar von elgeneral
    Registriert seit
    Jun 2011
    Beiträge
    3.593
    Post Thanks / Like
    Blog Entries
    45
    EVOTRIPLEX on Spark7162 (TRIPLEX) YAFFS2


    here the next "to be regarded as beta" evo image
    spark for the triplex (7162) box!

    CAUTION READ CAREFULLY! THIS IS A YAFFS2-IMAGE!

    changelog:
    TRIPLEX GM (7162) AND AMIKO2ALIEN + CO
    # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
    Evolux version = 4.01.2
    - Pti update
    - Record nhd2 fix (please test, osc = 5 pmt_mode needed!)
    - Update to nhd2 R950 spark7162spec with patches!
    - Cables / terrestical.xml added
    # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
    Evolux version = 4.01.1
    - CVBS / scart sound fixed
    # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
    EvoluxTriple V4.01.0
    - Switch to yaffs2 filesystem please read carefull howto flash image!
    - Switched to stm24-210 (thx dboxoldie)
    - Amixer fixed
    - Nhd2 multi tuner fix? please test!
    - Nhd2 extras-menu-add
    - Nhd2 time on boot fix

    Code:
    @your own risk!
     no warranty if you damage your box!!
     READ CAREFULL!!!
    
     YOU MUST HAVE ORIG-SPARK VERSION >=1.2.09 IN BOX!!
    
     ###############################################################
     ### FLASH EVOLUX ##############################################
     ###############################################################
     FLASH EVOLUX:
     - format usb-stick with fat/fat32
     - copy "uImage" + "e2yaffs2.img + flash_E2_yaffs2_triplex.sh" into usb-stick-folder "enigma2"
     - connect usb-stick to box-usb-port backside
     - BOOT ORIG-SPARK
    
     ###############################################################
     telnet pingulux-ip
     user: root
     pw: root
    
     check if stick correct mounted:
     ls /storage/c/enigma2
    
     (if you see uImage, e2yaffs2.img all fine)
    
     now we start flashing by:
     /storage/c/enigma2/flash_E2_yaffs2_triplex.sh
    
    
     are you sure? start flashing EVOLUX now (Y/n) ?
    
     select:
     y
    
     ###############################################################
     that takes around 1-2 minutes
     till finished you must turn of AC,
     turn on AC + hold "OK" on box till "FORC" in display,
     press "arrow-down" ("ENG" will displayed),
     press "ok" again and uboot will switch to boot Evolux!
    
     if you want back to orig do same aboth but than "arrow-up" against "arrow-down" and orig will bootup again!
    
     ##############################################################
    E2PLI: ________________ nhd2:


    This image is NOT for gm990 + co!
    exclusively for GM TRIPLEX7162 boxes and identical as Amiko alien2 etc.!

    imho is e2pli and nhd2!

    - E2Pli: please after firstboot vali-hd-nano skin change because it works best!
    (mini-pic on hdtv is chopped shown in the skin which is not be harmful to the function! on SDTV is mini-pic ok!)
    oupdate not available!

    other info:
    Tunera = dvb-t
    tunerB = sat1
    tunerC = sat2

    Tunera can switch in / etc / init.d / rcS between DVB-T and DVB-C:

    PHP-Code:
      insmod MODDIR/spark7162.ko Union tuner type # t = terrestical, c = cable 
    change and must be rebooted for tunerconfig again made​​! (default budget dvb-t)

    thanks to pinky1981
    Angehängte Dateien Angehängte Dateien
    ONLY SUPPORT VU+ ORIGINAL
    Vu+Solo2 White Edition
    Qviart Unic
    Qviart Undro
    Mvision HD 700L
    Vu+ Duo2
    Vu+ Ultimo
    PrismCube
    Matrix Cam Air, Vu+ALLCAM, Argolis Triplex
    CCcam 2.1.3 BlackHole Astra-HotBird

    Hidden Content
    Hidden Content


  3. #3
    El del VietNam Avatar von elgeneral
    Registriert seit
    Jun 2011
    Beiträge
    3.593
    Post Thanks / Like
    Blog Entries
    45
    here the next "to be regarded as beta" evo image
    spark for the triplex (7162) box!

    CAUTION READ CAREFULLY! THIS IS A YAFFS2-IMAGE!

    changelog:
    TRIPLEX GM (7162) AND AMIKO2ALIEN + CO
    changelog:
    GM TRIPLEX(7162) AND AMIKO2ALIEN+CO
    ################################################## ###########
    Evolux Version=4.01.3
    ALL:
    - e2_proc update
    - dvb-t/c-driver fix (spark7162.ko)
    - evo-onlineupdate activated
    NHD2:
    - record fix nhd2 (please test, osc pmt_mode=5 needed!)
    - update to nhd2 r998 with spark7162spec patches!
    - tuxtxt fixxed
    - nhd2 shutdown fixxed (dirty! turn off with errors, dunno why?!)
    - nhd2 standby fixed
    - webif remote fixxed
    - videomode 720p50 fixed


    # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
    Evolux version = 4.01.2
    - Pti update
    - Record nhd2 fix (please test, osc = 5 pmt_mode needed!)
    - Update to nhd2 R950 spark7162spec with patches!
    - Cables / terrestical.xml added
    # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
    Evolux version = 4.01.1
    - CVBS / scart sound fixed
    # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
    EvoluxTriple V4.01.0
    - Switch to yaffs2 filesystem please read carefull howto flash image!
    - Switched to stm24-210 (thx dboxoldie)
    - Amixer fixed
    - Nhd2 multi tuner fix? please test!
    - Nhd2 extras-menu-add
    - Nhd2 time on boot fix

    Code:
    @your own risk!
     no warranty if you damage your box!!
     READ CAREFULL!!!
    
     YOU MUST HAVE ORIG-SPARK VERSION >=1.2.09 IN BOX!!
    
     ###############################################################
     ### FLASH EVOLUX ##############################################
     ###############################################################
     FLASH EVOLUX:
     - format usb-stick with fat/fat32
     - copy "uImage" + "e2yaffs2.img + flash_E2_yaffs2_triplex.sh" into usb-stick-folder "enigma2"
     - connect usb-stick to box-usb-port backside
     - BOOT ORIG-SPARK
    
     ###############################################################
     telnet pingulux-ip
     user: root
     pw: root
    
     check if stick correct mounted:
     ls /storage/c/enigma2
    
     (if you see uImage, e2yaffs2.img all fine)
    
     now we start flashing by:
     /storage/c/enigma2/flash_E2_yaffs2_triplex.sh
    
    
     are you sure? start flashing EVOLUX now (Y/n) ?
    
     select:
     y
    
     ###############################################################
     that takes around 1-2 minutes
     till finished you must turn of AC,
     turn on AC + hold "OK" on box till "FORC" in display,
     press "arrow-down" ("ENG" will displayed),
     press "ok" again and uboot will switch to boot Evolux!
    
     if you want back to orig do same aboth but than "arrow-up" against "arrow-down" and orig will bootup again!
    
     ##############################################################
    E2PLI: ________________ nhd2:


    This image is NOT for gm990 + co!
    exclusively for GM TRIPLEX7162 boxes and identical as Amiko alien2 etc.!

    imho is e2pli and nhd2!

    - E2Pli: please after firstboot vali-hd-nano skin change because it works best!
    (mini-pic on hdtv is chopped shown in the skin which is not be harmful to the function! on SDTV is mini-pic ok!)
    oupdate not available!

    other info:
    Tunera = dvb-t
    tunerB = sat1
    tunerC = sat2

    Tunera can switch in / etc / init.d / rcS between DVB-T and DVB-C:

    PHP-Code:
      insmod MODDIR/spark7162.ko Union tuner type # t = terrestical, c = cable 
    change and must be rebooted for tunerconfig again made​​! (default budget dvb-t)

    thanks to pinky1981
    Angehängte Dateien Angehängte Dateien
    ONLY SUPPORT VU+ ORIGINAL
    Vu+Solo2 White Edition
    Qviart Unic
    Qviart Undro
    Mvision HD 700L
    Vu+ Duo2
    Vu+ Ultimo
    PrismCube
    Matrix Cam Air, Vu+ALLCAM, Argolis Triplex
    CCcam 2.1.3 BlackHole Astra-HotBird

    Hidden Content
    Hidden Content


  4. #4
    El del VietNam Avatar von elgeneral
    Registriert seit
    Jun 2011
    Beiträge
    3.593
    Post Thanks / Like
    Blog Entries
    45
    Changelog:

    GM TRIPLEX(7162) AND AMIKO2ALIEN+CO

    Evolux Version=4.01.4


    (oupdate not possible as too much changes!)
    ALL:
    - modules update
    - kernel update
    NHD2:
    - update to nhd2 r1027 with spark7162spec patches!
    - locale update
    - imageinfo fixed
    - twin record real fixed (thx mohousch)
    (crypt OSC pmt_mode=1 needed!)
    - more debug-off for higher stability
    Angehängte Dateien Angehängte Dateien
    ONLY SUPPORT VU+ ORIGINAL
    Vu+Solo2 White Edition
    Qviart Unic
    Qviart Undro
    Mvision HD 700L
    Vu+ Duo2
    Vu+ Ultimo
    PrismCube
    Matrix Cam Air, Vu+ALLCAM, Argolis Triplex
    CCcam 2.1.3 BlackHole Astra-HotBird

    Hidden Content
    Hidden Content


  5. #5
    El del VietNam Avatar von elgeneral
    Registriert seit
    Jun 2011
    Beiträge
    3.593
    Post Thanks / Like
    Blog Entries
    45
    GM TRIPLEX(7162) AND AMIKO2ALIEN+CO
    ################################################## ###########
    ### FULLFLASH-VERSION!!! ###
    Evolux Version=4.03.0
    # DO ONLY OUPDATE IF YOU HAVE FLASHED >=4.03.0!!! #
    - FullFlash:
    ALL:
    - switch to stm24-211 (maybe many fixes but also new bugs? please test!)
    NHD2:
    - minor fixes, update to r1120 with spark7162spec patches (thx mohousch)
    (details see: http://code.google.com/p/neutrinohd2/source/list)
    Angehängte Dateien Angehängte Dateien
    ONLY SUPPORT VU+ ORIGINAL
    Vu+Solo2 White Edition
    Qviart Unic
    Qviart Undro
    Mvision HD 700L
    Vu+ Duo2
    Vu+ Ultimo
    PrismCube
    Matrix Cam Air, Vu+ALLCAM, Argolis Triplex
    CCcam 2.1.3 BlackHole Astra-HotBird

    Hidden Content
    Hidden Content


  6. #6
    El del VietNam Avatar von elgeneral
    Registriert seit
    Jun 2011
    Beiträge
    3.593
    Post Thanks / Like
    Blog Entries
    45
    EVOTRIPLEX on Spark7162(TRIPLEX) YAFFS2

    GM TRIPLEX(7162) AND AMIKO2ALIEN+CO

    Evolux Version=4.06.0
    ### DO ONLY OUPDATE IF YOU HAVE FLASHED >=4.06.0 !!! ###
    ### FULLFLASH !!! ###
    - ALL:
    - kernel update
    (sorry but changes are to big for oupdate so fullflashing needed)
    - scart fixed
    - NHD2:
    - update extramenu
    - minor fixes, update to r1248 with spark7162spec patches (thx mohousch)
    Angehängte Dateien Angehängte Dateien
    ONLY SUPPORT VU+ ORIGINAL
    Vu+Solo2 White Edition
    Qviart Unic
    Qviart Undro
    Mvision HD 700L
    Vu+ Duo2
    Vu+ Ultimo
    PrismCube
    Matrix Cam Air, Vu+ALLCAM, Argolis Triplex
    CCcam 2.1.3 BlackHole Astra-HotBird

    Hidden Content
    Hidden Content


Aktive Benutzer

Aktive Benutzer

Aktive Benutzer in diesem Thema: 1 (Registrierte Benutzer: 0, Gäste: 1)

Marcadores

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •  
free counters